Mjerila toplinske energije
Nicht auf Lager
BTU Meters (Heat Meters - Cooling Meters)
BTU meters - commonly called heat meters, cooling meters or thermal energy meters in EU and international markets - measure the transferred thermal energy in hydronic heating and cooling systems. Energy is calculated from flow and the temperature difference (ΔT) between supply and return, typically reported in kWh/MWh (and optionally MJ or other units depending on configuration).
Why use a BTU (heat) meter?
- Billing & submetering: transparent, consumption-based allocation in multi-tenant buildings.
- Energy monitoring: track heat/cooling usage for optimisation and reporting.
- Performance verification: validate system efficiency, retrofits, and savings.
- Reliable integration: connect to BMS/EMS and remote reading infrastructures.
Typical applications
- Apartment and tenant submetering
- District heating and district cooling
- Commercial buildings (HVAC plants, risers, branches, AHUs)
- Industrial process heat and heat recovery
Communication & system integration
Choose the interface that matches your metering architecture—wired for stable building networks, or wireless for retrofit and hard-to-reach installations.
| Interface | Best for |
|---|---|
| M-Bus | Multi-tenant submetering, building networks, data concentrators |
| RS-485 / Modbus RTU | Industrial sites, plant rooms, BMS integration |
| LoRa / LoRaWAN | Retrofits, remote reading, low-power long-range wireless |
| Pulse outputs | Simple integration into counters, PLCs, data loggers |
How to select the right heat meter
- Pipe size & flow range: DN size, nominal flow, peak flow.
- Heating only vs. heating + cooling: required registers and measurement modes.
- Temperature sensor setup: paired sensors, immersion pockets, cable length.
- Connectivity: M-Bus, Modbus/RS-485, LoRa, pulse, etc.
- Installation constraints: available straight pipe runs, orientation, accessibility.
- Local requirements: depending on country and use case, compliance (e.g., EN standards / MID) may be required—confirm your project’s regulatory needs.
BTU meters available
Filter by DN size, interface, and application. For project support, share your DN, flow range, heating/cooling requirement, and preferred interface.
FAQ
Are “BTU meter” and “heat meter” the same thing?In practice, yes. “BTU meter” is a common term in some markets, while “heat meter” or “thermal energy meter” is widely used in Europe. Both refer to meters that calculate thermal energy from flow and ΔT in hydronic systems.
Can a heat meter measure cooling energy too?Many models can support both heating and cooling measurement depending on configuration, sensor setup, and registers. Check the meter’s supported modes for your application.
Ultrasonic vs. mechanical heat meters: what’s the difference?Ultrasonic meters typically have no moving parts, which can reduce wear and help maintain stable accuracy over time. Mechanical meters can be cost-effective, but performance may be more sensitive to water quality and long-term mechanical wear.
Which interface is most common in European submetering?M-Bus is widely used in multi-tenant submetering systems across Europe. For plant rooms and BMS/industrial environments, Modbus RTU (RS-485) is also very common.
Do heat meters require straight pipe runs?Requirements vary by meter type and model. Many installations need recommended upstream/downstream straight lengths to ensure accuracy. Follow the meter’s installation instructions for your DN and layout. Usually for BTU meters / heat meters DN15 to DN40 no straightening pipe is required, for flange meters usually a straight pippe of 5d / 3d is required.
What information do I need for a quote?Provide DN size, expected flow range, heating/cooling requirement, temperature range, preferred interface (M-Bus/Modbus/LoRa/etc.), and any installation constraints (space, accessibility, power availability).
BTU meters for billing, submetering and energy management
Heat meters are a core component in modern energy management strategies—especially where transparent consumption data supports cost allocation, optimisation, and sustainability reporting. With the right interface, BTU meters can be integrated into data concentrators, gateways, and software platforms to enable remote readings, dashboards, alerts, and long-term analytics.
